Exibel DABX30C, Инструкция по эксплуатации

Страница: 5 / 28

4 5
En
gl
is
h
5. Remove the protective film from the antenna and the ground cable.
6. Securely attach the ground cable to the A-pillar and then attach the antenna
to the windscreen. Note: Once the antenna has been securely fastened
then it is difficult to move it at a later stage.
7. Connect the antenna cable down the A-pillar and in behind the dashboard
to the DAB adaptor.
8. Connect the antenna to the DAB adaptor.
9. Refit the panel on to the A-pillar.
10. Remove the protective film from the LCD display.
Operating instructions
Switching on/off
Slide the [ ON/OFF ] switch to the side to turn the device on or off.
Searching for DAB radio stations
Press and hold in the multifunction knob for automatic radio station search.
Whilst the radio is searching, “Scanning…” will appear on the display along with
a number showing how many channels have been found. All stations found
during the search will be saved in the DAB adaptors list of stations.
Setting the FM transmitter frequency
1. Press [ Tx ]. The current FM transmission frequency will be displayed. Turn
the multifunction knob to select a vacant FM frequency. For the best sound
quality try to select a frequency as far from other FM stations as possible.
2. Turn on the car stereo.
3. Tune in the FM radio of the car stereo to match the frequency you set
the DAB adaptor to under step 1.
Selecting a radio station
Turn the multifunction knob to select the radio station that you wish to listen to
from the list. Confirm by pressing the knob. To exit the station list, press [ Info/
Menu ] or wait 15 seconds.
Make sure that you always concentrate on your driving and
the traffic around you.