Exibel DAB X50, Руководство пользователя

Страница: 11 / 52

11
En
gl
is
h
Preset channels
Up to 10 stations can be preset in both DAB and FM mode, this will enable you to
access your favourite stations more quickly.
Note: No more than 5 seconds must elapse between button-presses otherwise
the radio will return to the previous display mode.
Saving a radio channel as a preset channel
1. Choose the channel that you wish to save.
2. Hold in [ PRESET ] until the channel appears in the display.
3. Select a preset slot for the channel by pressing [ |
◄◄
] or [
►►
| ].
4. Save by pressing [ VOLUME/SELECT
►
ll ]. “Preset # stored” will appear on
the display.
Selecting a channel from the preset channels
1. Press [ PRESET ]. “Preset Recall” will appear on the display.
2. Press [ |
◄◄
] or [
►►
| ] repeatedly to navigate the preset channel list.
3. Select a channel slot and confirm by pressing [ VOLUME/SELECT
►
ll ].
If you choose a channel slot which has no preset radio channel on it, “Preset Empty”
will be shown on the display.
External devices
Bluetooth
1. Select audio source: Press [ MODE ] repeatedly until “Bluetooth” appears on
the display.
2. Make sure that no other Bluetooth device is connected to the radio.
“Disconnected” will appear on the display.
3. Activate Bluetooth on the device which is to be paired with the radio.
4. The speaker will appear on your device as
DAB X50 , select it and pair it with your
device. Refer to the instruction manual of your device for further clarification if you
are unsure.
5. “Connected” will appear on the display once they are connected/paired.
6. Control playback from the external device and the radio.
Note: If you are prompted to enter a PIN code on your device, you should enter 0000
(four zeroes). Certain devices may also require you to approve the connection.
Audio source input (AUX IN)
1. Connect an external audio source to the 3.5 mm input jack (14) on the back of the radio.
2. Select audio source: Press [ MODE ] repeatedly until “Auxiliary Input” appears on
the display.
3. Start playback on the external audio source.
4. Adjust the volume to a desired level.