![background image](http://html1.mh-extra.com/html/exibel/bix82/bix82_user-manual_2450232001.webp)
GREAT BRITAIN - CUSTOMER SERVICE
contact number: 020 8247 9300 e-mail: [email protected] internet: www.clasohlson.co.uk
English
6
5
7
2
3
4
1
Red and blue
NFC-sensor
Blue
Ver
. 20150506
Wireless Sports Earphones
with Microphone
Art.no 38-7045, 38-7046
Model BIX82
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. In the event of technical problems or other queries,
please contact our Customer Services.
Safety
• Never subject the headset to high temperatures, dust, heavy
vibration, impacts, water or moisture.
• Do not place the headset where there is a risk of it falling into
water or other liquid.
• Do not expose the headset to direct sunlight for prolonged periods.
• Never attempt to tamper with or modify the headset in any way.
• Only use the supplied charger cable.
• Do not leave the headset on charge for longer than necessary
when they are not in use. Discontinue charging during thunderstorms.
• Check your local regulations regarding mobile phone use in
combination with driving.
• Shut off both the headset and mobile phone in areas where you
are requested to do so, such as hospitals, aircraft or explosive
environments.
Buttons and functions
3. [ − ]
-
Repeated short presses will lower the volume.
Note:
Do not
press too quickly; otherwise you will select the previous track.
-
Press the button twice in quick succession to select
the previous track.
-
Hold the button in during a call to switch off the microphone.
Hold the button in again to turn the microphone back on again.
4. Microphone.
5. Open the cover over the connection for the included charger cable.
6. Micro-USB port for connecting a charger cable.
7. LED indicators.
Operating instructions
The cord can be adjusted to the desired length using the included clips.
3. The LED indicator (7) shines red when charging is in progress.
4. The LED indicator shines blue once the battery is fully charged.
Charging time: 1 hour.
5. Stop charging when the battery is fully charged, overcharging
reduces the battery capacity.
The LED indicator will flash red when the battery power is low.
iPhones have an icon on their displays to indicate the battery status
of the headset.
Connecting via NFC (Near Field Communication)
The headset can connect to NFC compatible telephones (Android 4.1
or higher).
1. Activate Bluetooth and NFC on your telephone.
2. With the headset switched off, hold down [
▲
] on the headset
until the LED indicator flashes red/blue.
3. Hold the keypad of the headset against the NFC area on
your telephone (normally on the back, see fig) and follow
the instructions which will appear on the screen of your
telephone (see example below).
Note:
If you are prompted to enter a PIN code on your telephone,
you should enter
0000
(four zeroes). Certain telephones may also
require you to approve the connection.
If you have connected a mobile phone to the headset via Bluetooth
and receive a call whilst you are listening to music, the music will
be switched off automatically. Once the call has been ended, music
playback will be resumed (if your phone settings enable this).
Care and maintenance
• Clean the headset using a lightly moistened cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
• Make sure that the battery is fully charged if you do not intend to
use the headset for a long time. The battery should be charged
every 3 months when the headset is not being used, in order for
the battery to maintain full capacity.
Troubleshooting guide
The headset will
not switch on.
Make sure that the battery is charged.
See the
Charging
section above.
Poor or
no sound.
• Adjust the volume on both your telephone
and the headset.
• Make sure that a Bluetooth connection
has been properly established.
• Test the playback from your telephone
before connecting it.
• Try playback using another file or format
e.g. MP3. The file you are attempting to
play may be incompatible or corrupted.
• Make sure that no other wireless device is
disrupting the Bluetooth connection.
• Make sure that your telephone is within
range of the headset, max 1 m.
1. [ + ]
-
Repeated short presses will raise the volume.
Note:
Do not press too quickly; otherwise you
will select the next track.
-
Press the button twice in quick succession to
select the next track.
-
Holding the button down will transfer
an ongoing call between the headset and
a telephone. Hold it down again to move
the call back.
2. [
▲
]
-
Hold in to switch the headset off.
-
When the headset is switched off, hold in until
the LED indicator flashes red/blue to make
the headset detectable for other Bluetooth
devices.
-
Quick-press to play/pause during music playback.
-
Quick-press to answer and end incoming calls.
-
Pressing the button 2 times will call
the previous number dialled. On certain
models of telephone, this feature only works
when music playback is switched off and no
calls are in progress.
-
Holding in and then releasing the button will
reject an incoming call.
-
If you receive an incoming call in the middle of
another call, a quick-press of the button will
answer the new call and end the old call.
-
If you receive an incoming call in the middle of
another call, holding the button in for 3 seconds
will answer the new call and put the old call
on hold. Hold the button in again to return to
the first call.
Try the earplug sleeves to find out which ones fit you best.
Charging
The built-in battery cannot be replaced. Charge the battery before
using the headset for the first time. The battery only reaches full
capacity after it has been fully charged 2 or 3 times.
1. Connect the supplied charger cable to a USB charger.
2. Remove the charging port cover from the right earphone and
plug the charger cable in.
Connecting via Bluetooth
1. Hold the headset and your mobile phone (or other Bluetooth
device) at a distance of no more than 1 metre from each other.
2. With the headset switched off, hold down [
▲
] on the headset
until the LED indicator flashes red/blue.
3. Activate Bluetooth on your telephone.
4. The headset will appear as
BIX82
on your telephone. Select this
as the device to be connected.
5. When a connection has been established, the LED indicator will
flash blue every few seconds.
6. Check the playback on your headset or your telephone.
Refer to the
Buttons and functions
section for an explanation of
the headset controls.
7. If no connection is established after 2 minutes, the headset will
switch off automatically.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
Bluetooth
V 3.0
Compatible with
HSP, HFP, A2DP, AVRCP
Range
10 m
Talk time
5 hours
Listening time
4.5 hours
Standby time
180 hours