EN
G
LI
SH
7
Set time and date
1. Switch on the camera with the power switch.
2. Press joystick down [MENU] to open the menu.
3. Press joystick down [MENU] several times to get to “
Date Input
”.
4. Press [OK] and select “
Set
”.
5. Press [OK].
6. Press the joystick to the right [RIGHT]. Enter the correct year with
[MODE] and [MENU].
7. Press the joystick to the right [RIGHT] to continue setting month, date and time.
8. Press [OK] to save setting.
9. Press the joystick to the left [LEFT] to return to normal display.
7. Using the camera
Saving a still picture
1. Turn on the inspection camera with the power switch.
2. Press the joystick upward [MODE] repeatedly until the “A” (symbol for still picture)
appears in the top right corner.
3. The camera image appears on the display.
4. Aim the camera head at the object. Check that the image on the display
is sharp and clear.
5. The luminance of the LEDs on the camera head can be adjusted by pushing
the joystick to the left [LEFT] or right [RIGHT].
5. Hold the inspection camera still and press [OK] to take a picture.
Saving a video clip
1. Turn on the inspection camera with the power switch.
2. Press the joystick upward [MODE] repeatedly until the video symbol appears
in the upper right corner.
3. The camera image appears in the display.
4. Aim the camera head at the object. Check that the image on the display
is sharp and clear.
5. The luminance of the LEDs on the camera head can be adjusted by pushing
the joystick to the left [LEFT] or right [RIGHT].
6. Press [OK] to start video recording.
7. As the video records, the elapsed time appears in red text at the bottom
of the display.
8. Press [OK] to stop recording.
Video recording stops automatically when the memory card is full.
