Setting Up Copper Tests
52
MAX-610
Dialer Function
Dialer Function
The
Dialer
function provides a dial-up path from the
MAX-610 to another tester (or quiet termination or
silent switchman) through a switched circuit network.
DTMF (dual-tone multi-frequency) transmission is
enabled via the phone keypad allowing you to place
POTS calls. The dialer can be accessed from the
Copper Main
pane and is also integrated into
individual test screens to give you quick access to the
manual dialer function, speed dial and last dialed lists,
without exiting the current test application.
To access the Dialer function:
1.
On the
Home
pane use the up/down arrow keys
to highlight
Copper Test
, then press
.
2.
From the
Copper Main
page select
Dialer
and press
.
Dialer
The
Dialer
function allows you to use the unit as a
telephone (with the built-in speaker or external
headset) and the on-screen phone keypad as a dialer
when
Enter Number
is invoked, whether in the test
results screens or through the separate dedicated
Dialer
application. The following functions can be
accessed from this page:
Dialing Status
shows the current status of the
dialed number.
Group ID
displays the group ID number of the
dialed number if it was selected from the
Phone
Book
.
Entry ID
displays the
Entry Name
of the dialed number if it was
selected from the
Phone Book
.
