EXFO FVA-60B, Руководство пользователя

Страница: 20 / 37

FVA-60B
13
To change the software display mode:
1.
Highlight Mode setting .
2.
Press the space bar to switch through the three options. The data in the upper
portion of the screen changes with the selected mode.
To change the attenuation setting:
1.
Highlight Attenuation setting . The cursor appears under the attenuation value.
2.
Enter the new value and press Enter .
Note:
Values outside the attenuation range will generate an error message.
To change the relative value:
1.
Highlight X+B value setting .
2. Enter a value between
−
99.95 and 99.95 and press Enter .
To change the wavelength:
1.
Highlight Wavelength setting .
2. Enter the new wavelength (4 digits) and press Enter . If a valid wavelength is
entered, the unit switches to the new setting.
Understanding the Program Menu
To change program parameters:
1.
Highlight the desired parameter.
2. Enter a value and press Enter . Values outside the allowable range will generate
an error message.
3. Press the tab to run the attenuation program.
4. Press any key to end the program execution.
Note: The program you created does not modify the program that is stored in
the unit.
Viewing Source Files
The programming source and header files are included in the LISTINGS directory of
the floppy disk. Refer to the README.DOC file for a description of the contents of
each of these files.
View the files using any text editor, word processor, or via the Borland C
programming environment. The floppy disk also includes a DISPLAY.EXE file that
can display the files’ contents. To view a particular file, type
DISPLAY FILEPATH/FILENAME.EXT, where
filepath/filename.ext is the full filename
(including drive and directory) of the file you wish to view.
FVA-60B
13
To change the software display mode:
1.
Highlight Mode setting .
2.
Press the space bar to switch through the three options. The data in the upper
portion of the screen changes with the selected mode.
To change the attenuation setting:
1.
Highlight Attenuation setting . The cursor appears under the attenuation value.
2.
Enter the new value and press Enter .
Note:
Values outside the attenuation range will generate an error message.
To change the relative value:
1.
Highlight X+B value setting .
2. Enter a value between
−
99.95 and 99.95 and press Enter .
To change the wavelength:
1.
Highlight Wavelength setting .
2. Enter the new wavelength (4 digits) and press Enter . If a valid wavelength is
entered, the unit switches to the new setting.
Understanding the Program Menu
To change program parameters:
1.
Highlight the desired parameter.
2. Enter a value and press Enter . Values outside the allowable range will generate
an error message.
3. Press the tab to run the attenuation program.
4. Press any key to end the program execution.
Note: The program you created does not modify the program that is stored in
the unit.
Viewing Source Files
The programming source and header files are included in the LISTINGS directory of
the floppy disk. Refer to the README.DOC file for a description of the contents of
each of these files.
View the files using any text editor, word processor, or via the Borland C
programming environment. The floppy disk also includes a DISPLAY.EXE file that
can display the files’ contents. To view a particular file, type
DISPLAY FILEPATH/FILENAME.EXT, where
filepath/filename.ext is the full filename
(including drive and directory) of the file you wish to view.
FVA-60B
13
To change the software display mode:
1.
Highlight Mode setting .
2.
Press the space bar to switch through the three options. The data in the upper
portion of the screen changes with the selected mode.
To change the attenuation setting:
1.
Highlight Attenuation setting . The cursor appears under the attenuation value.
2.
Enter the new value and press Enter .
Note:
Values outside the attenuation range will generate an error message.
To change the relative value:
1.
Highlight X+B value setting .
2. Enter a value between
−
99.95 and 99.95 and press Enter .
To change the wavelength:
1.
Highlight Wavelength setting .
2. Enter the new wavelength (4 digits) and press Enter . If a valid wavelength is
entered, the unit switches to the new setting.
Understanding the Program Menu
To change program parameters:
1.
Highlight the desired parameter.
2. Enter a value and press Enter . Values outside the allowable range will generate
an error message.
3. Press the tab to run the attenuation program.
4. Press any key to end the program execution.
Note: The program you created does not modify the program that is stored in
the unit.
Viewing Source Files
The programming source and header files are included in the LISTINGS directory of
the floppy disk. Refer to the README.DOC file for a description of the contents of
each of these files.
View the files using any text editor, word processor, or via the Borland C
programming environment. The floppy disk also includes a DISPLAY.EXE file that
can display the files’ contents. To view a particular file, type
DISPLAY FILEPATH/FILENAME.EXT, where
filepath/filename.ext is the full filename
(including drive and directory) of the file you wish to view.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com