EXFO FTB-860 Скачать руководство пользователя страница 161

Страница: 161 / 409

NetBlazer

149

11 Smart Loopback Test Setup

and Results

The Smart Loopback test allows looping back an Ethernet data stream
simply based on the interface setup parameters. To configure

Interface

setup, see

Interface

on page 280. The Smart Loopback test can be created

from a local device or remote device. To create the test from a local device,
see

Configuring a Smart Loopback Test

on page 149. To create the test

from a remote device, see

Third-Party Remote Loopback

on page 153. The

incoming frames are re-transmitted after exchanging the source and
destination addresses at multiple layers (Ethernet MAC, IP, UDP).

Configuring a Smart Loopback Test

To configure the Smart Loopback test:
1.

From the

Test

menu, press

Setup

From the

Test Applications

tab,

under

Ethernet

group, press

Smart Loopback

Note:

If the interface is not in

Full Duplex

, application displays a message to

change the interface to

Full Duplex

From the

Interface

tab, configure the

Port

Network

settings, and view

the information on the

SFP/SFP+

page. See

Interface

on page 280.

Ensure that the link is up in the status bar before proceeding to the next
step.

Press

Start

to start the test.

Summary

result page will be automatically

displayed. See

Summary Results

on page 150.

Содержание FTB-860


























































































































































































































































































































































































































Результаты поиска

Содержание FTB-860

Отзывы:

EXFO FTB-860, Руководство пользователя, Страница: 161 / 409

Результаты поиска

Содержание FTB-860

Отзывы: