manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 292 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 292

Common Test Setup, Results, and Functions

280

FTB-860/880

Interface

Interface

The 

Interface

 is used to configure the local test interface. The required 

parameters correspond to the physical, data link, and network layers. The 
parameters are globally configured and applied to all tests at the exception 
of Packet Sync tests. Ensure that these parameters are set before running 
any tests. Configuring the interface includes configuring the Port, Network, 
VLAN settings and you can view the information on SFP/SFP+ as described 
in the following procedures.

Interface - Port

The 

Port

 tab allows the selection and the configuration of the physical port.

From the 

Test

 menu, press 

Setup

, 

Interface

, and the 

Port

 tab.

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов