EXFO FIP-400, Руководство пользователя

Страница: 48 / 78

Inspecting Fiber Ends
42
FIP-400
Analyzing Captures (Optional, Single-Fiber Connector Mode Only)
Analyzing Captures (Optional, Single-Fiber
Connector Mode Only)
If you have acquired the capture analysis tool, it will be available in
ConnectorMax for you to perform automated pass/fail analyses according
to the criteria you have set.
The analysis option enables all of the tabs in the viewing area, whereas the
inspection-only option only enables the
Image
and
Identification
tabs.
Note: On units that allow it (FTB-500, FTB-200 v2), you will notice that the
Pass/Fail LED will indicate the analysis result as you capture files.
To enable the analysis tool:
1.
From the main window, select User Preferences .
2. Under the
General
tab, select
Analyze on capture
.