Exerpeutic 1110.6, Руководство пользователя

Страница: 15 / 21

ASSEMBLY
Step 6
Loosen the Nylon Nut (L)(102) and Nylon Nut (R)(101) from the Left and Right
Pedals (7) & (8) first. The Cranks, Pedals, Pedal Shafts and Pedal Straps are
marked “R” for Right and “L” for Left.
Insert the Left Pedal (7) into the threaded hole in the Left Crank (23). Turn the
pedal shaft by hand in a counter-clockwise direction until snug.
Note: DO NOT turn the left pedal shaft in a clockwise direction, doing so will strip
the threads.
Tighten the Left Pedal (7) with the 13-15mm Wrench provided, then
tighten the Nylon Nut (L) (102) with the 19mm Wrench provided as shown in Fig. AA-4.
Insert the Right Pedal (8) into the threaded hole in the Right Crank (24).Turn the
pedal shaft by hand in a clockwise direction until snug.
Tighten the Right Pedal (8) with the 13-15mm Wrench provided then
tighten the Nylon
Nut (R) (101) with the 19mm Wrench provided.
Important:
Make sure the right pedal matches up with
the right crank and the left pedal matches up
with the left crank.
If reversed the cranks may become
damaged or stripped.
Important:
Screw Right Pedal (8) into right crank
hole clockwise!
Screw Left Pedal (7) into Left crank
hole counter-clockwise!
13
Tool:
13 – 15mm Wrench
19mm Wrench