exemys SSE232-IA, Руководство пользователя

Страница: 28 / 39

SSE232-IA User’s Manual Exemys
www.exemys.com Rev. 4 Page28
Table Table Table Table 15 15 15 15 ---- OUT command OUT command OUT command OUT command
Command Command Command Command Description Description Description Description Answer Answer Answer Answer
OUTo:s<CR>
Changes the status of the o output.
o = 0..m-1 (“m” is the quantity of outputs available
on each model).
s = 0..1 Is the new status of output o.
OUTo:s,OK<CR>
The status of the output
“o” has been changed.
OUTo:s,ERROR<CR>
The output is not
available or not available
on this model
3.2.8.4 3.2.8.4 3.2.8.4 3.2.8.4 Automatic Digital Automatic Digital Automatic Digital Automatic Digital Input Report (DIR) Input Report (DIR) Input Report (DIR) Input Report (DIR)
In the Supervision and Control port, SSE232-IA provides a way to handle inputs events. SSE232-IA
can report the status of all inputs when detecting a change in one of them.
If the automatic digital input report option is enabled, SSE232-IA will inform the status of all the
inputs when a client connects to the TCP Port 999 and every time a change in any of the available
inputs is detected.
This option can be enabled or disabled according to your needs.
To enable or disable the automatic digital input report through the configuration Web page:
Select “Network” from the menu, you will see the Network configuration page.
Select the Digital Input Report Enabling from the combo box.
Click on the “Send” button, so the SSE232-IA may take the changes.
You may enable or disable this option from the configuration command console by executing the
DIREPORT
DIREPORT DIREPORT DIREPORT command.
Table
Table Table
Table 16
16 16
16 ---- DIREPORT command
DIREPORT command DIREPORT command
DIREPORT command
Command Command Command Command Description Description Description Description
DIREPORT:(E|D)
Configures the option of Automatic Digital Inputs Report in the
supervision and control mode.
E = Enabled
D = Disabled