23
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2009
v. Configuring the Q53 on Your Network
Required TCP/IP Settings
2. If dynamic addressing is desired, then click on the radio button to the left of the
label
Obtain an IP address automatically,
then proceed directly to step 9 below;
this will cause the Q53 to request its TCP/IP parameters from a DHCP server over
the network.
To specify a static IP address, click on the radio button to the left of the label
Use
the following IP address:
and proceed to step 3 below.
3. Enter the IP address in the
IP Address
field.
4. Enter the Q53’s subnet mask in the
Subnet Mask
field.
5. [Optional setting] In order to communicate across subnets with the Q53, enter the
address of the default gateway in the
Default Gateway
field.
6. [Optional setting] In order to use host and domain names in addition to dotted quad
IP addresses, enter the address of the domain name server in the
DNS Server
Address
field.
7. [Optional setting] Enter the suffix of the domain name for the Q53 in the
DNS
Domain Suffix
field.
8. [Optional setting] To change the TCP window size, select the desired value in the
TCP Window Size
combo box.
9. Click on "Submit" when done.
10. Go to the Restart page and click on "Restart" to apply the new settings to your
system.
