112803A-1
29
OWNER’S MANUAL
# 36122
ver.
112803A-1
Page: 29 ENGLISH VERSION
K. ID SET 2
During a call, the source handset user can press the OPT/TRANSFER button followed by
destination handset. The call is quick transferred to the destination handset, it starts ringing
and shows “TRANSFER”. If destination handset user does not answer the call with 30 sec,
source handset will be ring back for 30 sec.
1. Press and
hold
the MENU/SCAN button.
2. Press the
#
button once.
3. Press the SA/MEMO button to save the setting.
4. Press the MENU/SCAN button to go back to standby mode.
65,536 Combination Security Coding
The cordless telephone have a digital coding security system to prevent unauthorized use of
your telephone line by other cordless phones nearly. The cordless telephone have 65,536
possible security code combinations. Each combination of the code is randomly generated
every time the handset is picked up.
Resetting Security Code and Channel
Communication between the handset and the base unit may not be possible in any of the
following situations:
1. After a power failure.
2. After relocating the base unit by disconnecting the AC adapter.
3. After replacing the handset battery.
4. The handset goes out of range from the base unit.
To reset, place the handset on the cradle of the base unit for five seconds.
IMPROVING CORDLESS RECEPTION
Follow these guidelines to improve cordless sound quality:
•
Select an area to install the unit where it is closest to the center of your home or office.
This will improve the operating range of the unit.
•
Keep the base unit away from electrical equipment. Radio Frequency Interference (RFI)
is sometimes generated by these appliances, which can cause a degradation in cordless
reception.
•
Keep the handset batteries charged as much as possible. Weak handset batteries can
limit the range of cordless operation.
ID SET
2
#
12
TOTAL
12
