4. Special Functions
4.1 Special Functions:
Recalibrating: When the Smart Glider experiences an error, the Running indicator light will
remain red, meaning your Smart Glider will not operate until it is properly recalibrated. To
recalibrate, follow these steps:
1.
Place the Smart Glider within its horizontal position against a wall or your box (as if you
will ride on it). Please assure that the Smart Glider stays within this manner and stable
throughout the whole recalibration process.
2.
Press the power button and keep it in for a few seconds until the Smart Glider lights
starts flashing.
3.
The Smart Glider is now within its calibrating mode.
4.
Leave your Smart Glider for 2-3 minutes.
5.
Switch the Smart Glider off at the power button.
6.
Your Smart Glider should now be reset.
If still not functioning, please contact the EBO team. ([email protected])
5. SMART GLIDER SAFETY PRECAUTIONS –MUST READ
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE
TO YOUR I-GLIDE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE
SERIOUS BODILY INJURY, AND CAN LEAD TO SERIOUS INJURY/DEATH.
1.
Please wear all appropriate safety and protective gear as previously mentioned in the User
Manual (Section 3) before operating the Smart Glider.
2.
Make sure to wear comfortable clothes and flat closed toe shoes when operating your I-glide.
3.
Please carefully read the User Manual, which will assist in explaining the basic working principles
and provide tips on how to best enjoy your I-glide experience.
4.
Before stepping on your Smart Glider, make sure it is placed flat on level ground, the power is
on, and the Running Indicator light is green. Do not step on if the Running Indicator is red.
