Excera EP8100 U2 Скачать руководство пользователя

Страница: 50 / 51

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct.

The interference by one or more of the following measures:

●

Reorient or relocate the receiving antenna. Increase the separation between the

equipment and receiver.

●

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

●

Consult the dealer or an experienced radio/TV technician for help

Operation is subject to the following two conditions: 1. This device may not cause harmful

interference, and 2. This device must accept any interference received, including

interference that may cause undesired operation.

Note:” Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.”

Compliance with RF Exposure Standards

Excera 2-way radio complies with the following RF energy exposure standards and

guidelines:

•

United States Federal Communications Commission, Code of Federal Regulations; 47

CFR §§ 1.1307, 1.1310 and 2.1093

• American National Standards Institute (ANSI) / Institute of Electrical and Electronic

Engineers (IEEE) C95. 1-1992

• Institute of Electrical and Electronic Engineers (IEEE)2014/53/EU Edition

RF Exposure Compliance and Control Guidelines and

Operating Instructions

Содержание EP8100 U2




















































Результаты поиска

Содержание EP8100 U2

Отзывы:

Похожие инструкции для EP8100 U2

Бренды по названию

Популярные бренды

Excera EP8100 U2, Руководство пользователя

Результаты поиска

Содержание EP8100 U2

Отзывы:

Похожие инструкции для EP8100 U2

Бренды по названию

Популярные бренды