Excell ZSME300000240 Скачать руководство пользователя страница 5

EXCELL PRECISION CO., LTD.

02018058 

 

                                     

 

                                                     

   

   

         

                                             

3

ZSME300000240

 
Due to the storage battery adopt the advanced free-maintaining technique, customers need 
not to replenish electrolyte. 
The scale should be recharged every 3 months to prevent failure of the internal 
rechargeable battery. 
1.  The battery should be charged for 8~10 hours.

 

2.  The temperature of battery should below 45

 
Maintaining 

1.  Please do not discharge with over-current when using the battery. Please charge the 

battery after discharging current. 

2.  Please take down the battery when the scale is not used for a long time or break the 

connection of cathode.   

3.  Do not short the battery terminals to check whether there is current. Please check 

whether the connection point is firm to guarantee good connection. 

4.  The battery should be replaced by specialized person. 

No reverse-battery or the 

product will be damaged.

 

a)  Anode of battery should be connected with Anode of product battery

usually red 

cable

 

b)  Cathode of battery should be connected with Cathode of product battery (usually 

brown cable or black cable) 

c)  See the picture following 

 
 
 
 
 
 

 
 
 
 
 
 
Safety warnings 

1.  The electrolyte of battery is caustic which causes metal, cotton, etc to corrode. 
2.  The hydrogen will be resolved when using or charging the battery and it will cause 

explosion when approaches fire. 

 

   

     

 

 

Brown cable(or black cable)

 

connected with Anode of 

battery

 

Red cable connected with

 

Cathode of battery

 

Содержание ZSME300000240


























Отзывы: