Excell PWZ0142700.01 Скачать руководство пользователя страница 4

M100135

Copyright © 2011 MAT Industries, LLC

4 - ENG

IMPORTANT SAFETY INFORMATION (CONT.)

• SAVE ALL INSTRuCTIONS

WHAT CAN HAPPEN

HOW TO PREVENT IT

• High-velocity fluid spray can cause objects to break, propelling 
particles at high speed�
• Light or unsecured objects can become hazardous projectiles.

• Always wear ANSI-approved z87.1 safety glasses. Wear protec-
tive clothing to protect against accidental spraying�
• Never point wand at or spray people or animals.
• Always secure trigger lock when wand is not in service to pre-
vent accidental operation�
• Never permanently secure trigger in pull-back (open) position.

DANGER

 RISK OF INJURY FROM SPRAY

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Unsafe operation of your pressure washer could lead to seri-
ous injury or death to you or others�

• Do not use chlorine bleach or any other corrosive compound.
• Become familiar with the operation and controls of the pressure 
washer�
• Keep operating area clear of all persons, pets and obstacles.
• Do not operate the product when fatigued or under the influence 
of alcohol or drugs� Stay alert at all times�
• Never defect the safety features of this product.
• Do not operate machine with missing, broken or unauthorized 
parts�
• Never leave wand unattached while unit is running.

• If proper starting procedure is not followed, engine can kick-
back causing serious hand and arm injury�

• If engine does not start after two pulls, squeeze trigger of gun to 
relieve pump pressure� Pull starter cord slowly until resistance is 
felt� Then pull cord rapidly to avoid kickback and prevent hand or 
arm injury�

• The spray gun/wand is a powerful cleaning tool that could look 
like a toy to a child�

• Keep children away from the pressure washer at all times.

• Reactive force of spray will cause gun/wand to kickback, and 
could cause the operator to slip or fall or misdirect the spray� 
Improper control of gun/wand can result in injuries to self and 
others�

• Do not overreach or stand on an unstable support.
• Do not use pressure washer while standing on a ladder.
• Grip gun/wand firmly with both hands. Expect the gun to kick-
back when triggered�

DANGER

 RISK OF FLUID INJECTION AND LACERATION

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Fuel or oil leak or spill could result in fire or breathing hazard. 
Serious injury or death can result� Fuel or oil leaks will damage 
carpet, paint or other surfaces in vehicles or trailers�

• If pressure washer is equipped with a fuel shut-off valve, turn 
the valve to OFF position before transporting to avoid fuel leaks� If 
pressure washer is not equipped with a fuel shut-off valve, drain 
the fuel from tank before transporting� Only transport fuel in an 
OSHA- approved container� Always place pressure washer on a 
protective mat when transporting to protect against damage to 
vehicle from leaks� Remove pressure washer from vehicle imme-
diately upon arrival at your destination� 

RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING 
OR STORING

DANGER

Содержание PWZ0142700.01



















Отзывы: