Copyright © 2011 MAT Industries, LLC
M100135
3 - ENG
IMPORTANT SAFETY INFORMATION (CONT.)
• SAVE ALL INSTRuCTIONS
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Materials placed against or near the pressure washer can
interfere with its proper ventilation features causing overheating
and possible ignition of the materials�
• Never operate pressure washer in an area containing dry brush
or weeds�
• Muffler exhaust heat can damage painted surfaces, melt any
material sensitive to heat (such as siding, plastic, rubber, vinyl,
or the pressure hose, itself), and damage live plants.
• Always keep pressure washer a minimum of 4´ (1.2m) away
from surfaces (such as houses, automobiles or live plants) that
could be damaged form muffler exhaust heat.
• Improperly stored fuel could lead to accidental ignition. Fuel
improperly secured could get into the hands of children or other
unqualified persons.
• Store fuel in an OSHA-approved container, in a secure location
away from work area�
• Use of acids, toxic or corrosive chemicals, poisons, insecti-
cides, or any kind of flammable solvent with this product could
result in serious injury or death�
• Do not spray flammable liquids.
DANGER
RISK OF EXPLOSION FOR FIRE (CONT.)
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Breathing exhaust fumes will cause serious injury or death!
Engine exhaust contains carbon monoxide, an odorless and
deadly gas�
• Operate pressure washer in a well-ventilated area. Avoid en-
closed areas such as garages, basements, etc�
• Never operate unit in a location occupied by humans or animals.
• Some cleaning fluids contain substances which could cause
injury to skin, eyes or lungs�
• Use only cleaning fluids specifically recommended for high-pres-
sure washers� Follow manufacturers recommendations� Do not
use chlorine bleach or any other corrosive compound�
DANGER
RISK TO BREATHING (ASPHYXIATION)
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Your pressure washer operates at fluid pressures and veloci-
ties high enough to penetrate human and animal flesh, which
could result in amputation or other serious injury� Leaks caused
by loose fittings or worn or damaged hoses can result in injec-
tion injuries� DO NOT TREAT FLuID INJECTION AS A SIMPLE
CUT! See a physician immediately!
• Inspect the high-pressure hose regularly. Replace the hose
regularly� Replace the hose immediately if it is damaged, worn,
has melted from contacting the engine, or shows any signs of
cracking, bubbles, pinholes, or other leakage� Never grasp a high-
pressure hose that is leaking or damaged�
• Never touch, grasp or attempt to cover a pinhole or similar wa-
ter leak on the high-pressure hose� The stream of water IS under
high pressure and WILL penetrate skin�
• Never place hands in front of nozzle.
• Direct spray away from self and others.
• Make sure hose and fittings are tightened and in good condition.
Never hold onto the hose or fittings during operation.
• Do not allow hose to contact muffler.
• Never attach or remove wand or hose fittings while system is
pressurized�
• Injuries can result if system pressure is not reduced before at-
tempting maintenance or disassembly�
• To relieve system pressure, shut off engine, turn off water supply
and pull gun trigger until water stops flowing.
•Use only hoses and accessories rated for pressure higher than
your pressure washer’s PSI.
DANGER
RISK OF FLUID INJECTION AND LACERATION
