02027011 ZSME300000342
15
EXCELL PRECISION CO., LTD.
Internal Value Mode
(must hook up full-bridge Load Cell to test)
Pres key and display shows internal value
Please check the internal value is within range
Check whether the backlight is on
Press key to back to last screen, the display shows
Keypad Test Mode
Press key to enter, display shows
Keypad
’
s internal cod: = 04, =05, =07, =06, = 03
Press key to back to last screen, the display shows
Firmware Version Display Mode
Press key to enter, display shows the firmware version
Press key again, the display shows maintenance number
for 2 seconds
Press key to back to the last screen, display shows
Back to the Last Screen
Press key, exit self-test mode, the scale will reboot automatically.
Hold Mode (Animal) Setting
2-5 Self-Test Mode
When power is off, hold key and press key to wait till display shows 01 AdC to
enter “Self-Test Mode”
%
Counts averaging setting
Press key to select 1, 2, 4, 8, 16, 32, 64
Press key to confirm. Default setting
= 8
Error range setting (1%~ 100%)
Press key to adjust; Press key to confirm
Press or key to move cursor
Default setting
= 10%
Содержание GWS
Страница 2: ......
