background image

Copyright © 2017 MAT Industries, LLC

5 - ENG

IMPORTANT SAFETY INSTRUCTIONS (CONT.)

• SAVE ALL INSTRUCTIONS

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Contact with hot surfaces, such as engine's exhaust 

components, could result in serious burn.

• During operation, touch only the control surfaces of the 

pressure washer. Keep children away from the pressure 
washer at all times. They may not be able to recognize 
the hazards of this product.

 

WARNING

 RISK OF HOT SURFACES

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Use of acids, toxic or corrosive chemical, poisons, 

insecticides, or any kind of flammable solvent with 
this product could result in serious injury or death.

• Do not use acids, gasoline, kerosene, or any other flammable 

materials in this product. Use only household detergents, 
cleaners and degreasers recommended for use in pressure 
washers.

• Wear protective clothing to protect eyes and skin from contact 

with spraying materials.

 

WARNING

 RISK OF CHEMICAL BURN

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Spray directed at electrical outlets or switches, or objects 

connected to an electrical circuit, could result in a fatal 
electric shock.

• Unplug any electrically operated product before 

attempting to clean it. Direct spray away from electric 
outlets and switches. 

 

WARNING

 RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Serious injury can result from attempting to lift too heavy 

an object.

• The pressure washer is too heavy to be lifted by one 

person. Obtain assistance from others before lifting. 

 

WARNING

 RISK OF INJURY FROM LIFTING

Содержание EPW2123100

















Отзывы: