EXCELL PRECISION CO., LTD.
02036XXX
ZSME300000422
18
r n p 10
or
key
Transmission (Brazil)
RS232 transmit
RS232 transmit
Print TOTAL and
clears totalized
values
r n p 11
Print after removing goods (5%
mode)
After placing item and become stable, beep twice. RS232
transmit item weight after item is removed.
r n p 12
Print after removing goods (OK
mode)
RS232 tran
smit only “OK” item weight after item is removed.
No transmission while in “HI” or “LO”.
r n p 13
Continuous transmission,
bluetooth format
Bluetooth transmit continuously through RS232. Keypad has
no effect.
r n p 14
Stable transmission, only weight
value is transmitted
After return to zero, transmit next stable weight’s weight
value only.
3-3 F6 Exit Function
Use
or
to select F6. Then press
to count down to zero and exit the
setting.
3-4 F7 Internal Value Display Mode
Use
or
to select F7. Then press
to display internal value. Press
again will see F7.
3-5 F8 Weight Hold Mode Setting
Use
key or
key choose F8
Before setup, please switch the SWA1 on
MINI JUMPER to ADJ position
After setup, please switch the SWA1 on
MINI JUMPER back to LOCK position
In hold mode, press
key, to print the
hold value as shown on display.
(It’s not related to the settings of F5
transmission mode, but it needs to select the
proper Baud rate according to the
transmission of the receiver.)
(To setup transmission rate, please refer to
F5 RS-232 Interface Output Setting (option))
Use
key to select a value from
hold 0 ~ hold 4 and then press
key to
complete setup.
Press
key Press
key
Press
key Press
key
Press
key
Press
key
