background image

User Manual 

 

Excel Entice

 

 

 

 

    

Pagina 15

 

 

 Battery charger specifications: 

 

• 

appropriate for the fitted batteries 

• 

maximum nominal charge current: 24 Volt 

• 

maximum nominal charge power: 6 Ah 

• 

suitable for unguarded use 

 
Opening battery space and removing batteries 

 
The batteries of the 

Entice 

can be reached by removing the rear cover. First remove the chair as described on 

page 16. The rear cover can be removed. Replacement in reverse order. The batteries should be lifted on the 
lower side. 

 
Storage 

 
If the 

Entice 

is not be used for longer time, please consider the below remarks. The 

Entice 

needs to be stored 

with fully charged batteries in a dry and freeze free environment, in regard to freezing danger of the batteries. 
Always turn the 

Entice 

off during storage. 

 
The charge condition of the batteries should be checked regularly when the 

Entice 

is not used for a long time. If 

necessary the batteries must be recharged. 
 
The 

Entice 

should never be left unnecessary in the bright sunlight. Parts like the upholstery or metal parts might 

get very hot. This also might shorten the tyres lifetime. 

 
Upholstery 

 
The scooters upholstery should be cleaned with a mild cleanser. Weep the upholstery should with a moist cloth 
after cleaning. 

 
Chassis and plastic parts 

The chassis and the plastic parts, including the control panel, should only be cleaned with a light moist cloth. Dry 
the parts after that with a dry cloth. 

 
It is not allowed to clean the 

Entice 

with a high pressure hose or otherwise using too much water. 

 
All the maintenance that can be done by the user is described in this chapter. If the 

Entice 

needs additional 

maintenance or repair you need to contact your dealer. It is not allowed to perform any other than the herein 
described tasks on the 

Entice. 

 
Charging the batteries 

 
Always charge the batteries regularly and on time. This preserves the maximum charge capacity and increases 
the lifetime of the batteries. For charging instructions see page 17. 

 
Tires 

 
It is very important to check the tire pressure or tire damage regularly. When any damage might occur (for 
instance caused by a nail or glass), contact your dealer immediately. 
The scooter tires should always be on the prescribed pressure (see chapter technical data). Driving with low 
pressure tires causes bad driving and steering characteristics. 
 

The tires should never be inflated over the maximum tire pressure. The tire might get off the rim or explode. 

 
Other maintenance 

 
Please leave any other maintenance to your dealer. Adapt the needed maintenance to your scooter together with 
your dealer. 
 
If any lubricant should leak, for instance from the gear box, please contact your dealer immediately and don’t 
drive the scooter again. 

 

Содержание Entice 4
























Отзывы: