Excel BigDog, Руководство оператора

Страница: 33 / 41

Warped Blade (Replace)
Straight Blade
Cutting
plane
Comparison of Warped and Straight Blades
Figure 4-8
Cutting edge
Twisted Blade Edge
(replace)
Cutting edge Cutting Plane
Straight Blade Edge
End view of blades, comparing
twisted and straightened blades
Figure 4-9
603744_0911 4-7
Seat adjustment
The seat on the mower can be adjusted forward and rearward
by releasing the seat latch and pivoting the seat platform up and
forward. Then loosen the four cap screws on the underneath side
of the operator’s platform. Position the seat where you have the
best control of the machine and are the most comfortable and
then tighten the cap screws. Figure 4-10
Cap screw
Figure 4-10
Steering control lever adjustment
The steering control levers can be adjusted for operator
comfort. By loosening the cap screws that attaches the upper
control lever to the lower lever (Figure 4-11), the upper control
lever can be pivoted to fit the operator’s personal preference.
The steering control levers can also be adjusted up and down.
Remove the cap screws and slide the upper control lever up or
down and align the holes in it with the holes in lower lever. Re-
install the cap screws and tighten.
The steering control levers should be adjusted so that they
align with each other when in the neutral position.