E X C E L D R Y E R , I N C 1 . 4 1 3 . 5 2 5 . 4 5 3 1 1 . 8 0 0 . 2 5 5 . 9 2 3 5 ( U S / C N ) E X C E L D R Y E R . C O M
A D M I N @ E X C E L D R Y E R . C O M 3 5 7 C H E S T N U T S T R E E T, E A S T L O N G M E A D O W, M A 0 1 0 2 8
5 / 2 0 2 0
1
R E A D A N D S AV E T H E S E I N S T R U C T I O N S
INSTALLATION AND OWNER’S MANUAL
XLERATORsync
®
Serial Number
Date Of Purchase
1
2
3
5
1. Unpack all items from the shipping box.
2. Review items against the following list:
1. Dryer Box Assembly
2. Deck Up Spout Assembly
3. Hose Assembly
4. Z-Bracket
5. Installation and Owner’s Manual
3. Report any missing or damaged items.
4. Locate the Dryer Model Number and Serial Number
on the Dryer nameplate and record the date below.
5. Read and save these instructions.
RECEIVING SHIPMENT
MODEL INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
WARNING: For proper electrical connections,
check your local building codes. Dryer is
intended to be cord connected to power supply,
and must be properly grounded.
•
Do not use any power wash equipment for cleaning on or near this
unit.
•
Do not use the XLERATORsync dryer for drying hair.
•
Do not obstruct air inlets or outlets.
PRE INSTALLATION WIRING SAFETY INSTRUCTIONS
•
Install a dedicated 20-amp GFCI outlet no more than 4 feet from
the installation of the dryer box. Make sure the supply corresponds
to that shown on the rating sticker of the unit. If the dryer is
connected to any electrical supply other than that stated on the
rating sticker of the unit, permanent damage or improper, unsafe
operation of the unit may result.
•
Make sure to unplug cord from receptacle before installing,
maintaining or cleaning this hand dryer.
GENERAL SAFETY INSTRUCTIONS
•
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a
hazard.
•
To preserve IP11B rating, dryer must be connected to air delivery hose
and connector
•
Troubleshooting and internal maintenance must be performed by
qualified service personnel.
EN
WARNING:
To reduce risk of fire, electric shock
or injury to persons, observe the following:
A Use this unit only in the manner intended by the
manufacturer.
B Before servicing or cleaning unit, unplug cord
from receptacle.
This appliance is designed to be used in commercial areas.
4
