Excalibur Excalibur Gold eg-1400atv Скачать руководство пользователя страница 5

indicate which zone triggered the system by flashing two to five times, pausing between
flashes. This violation code will continue to flash, even after disarming. The system can hold
four different codes in memory, which is cleared by turning the ignition switch "on".

Your Excalibur Gold vehicle security system offers a very high level of personal safety and

convenience with the advanced features utilized upon disarming. The ability to know instantly
if your system was triggered while you were away, and the exterior and interior light illumination
allows you a lighted approach to your vehicle with the ability to examine the interior before
entering. If you wish, you can program the system to turn on the exterior and interior lights
for five seconds instead of thirty seconds upon disarming.

Disarming the security system without the use of the remote transmitter, please see the

following section.

Valet Mode is a condition, or state, in which the security system may be placed to prevent

certain functions from occurring, especially any automatic functions such as Last Door
Arming.  An Override is an alternative method of disarming an armed and activated system.
Therefore, there are two separate and distinct methods to obtain these functions: first is Easy
Valet

TM

 

 

Mode, whereby a disarmed system may be placed into Valet Mode without the ignition

key, and the second is Personal Coded Override Mode, which will disarm an armed or activated
system and requires the use of the ignition key.

Easy Valet

TM 

&  Personal Coded Override

Page - 17

Page - 18

In most cases the Valet Switch is behind the LED Status Light, as both may be mounted

in a special combination holder.  Be sure your Excalibur Gold dealer indicates the location of
the Valet Switch, and demonstrates its operation, to you to avoid potential inconvenience
otherwise.

Easy Valet

TM 

Mode: This unique feature can be utilized anytime the security system is in

the disarmed condition. If your Excalibur Gold system is programmed to perform any automatic
features, such as Last Door Arming, you will find Easy Valet

TM

 Mode useful when stopping

for fuel, having your vehicle serviced, having it valet parked, etc. Easy Valet

TM

 Mode is unique

because other security systems require the ignition switch to be "on" to enter Valet Mode,
but with this system, the ignition can be either "on" or "off", so the ignition key is not required.

Whenever the security system is disarmed, simply depress the Valet Switch for two

seconds to achieve the Easy Valet

TM

 Mode. The system will confirm it is in the Easy Valet

TM

Mode with two siren chirps (or horn honks), and the LED Status Light will illuminate steady.
To remind you that the system is in Easy Valet

TM

 Mode, every time the ignition switch is turned

"off" the siren will chirp once (or the horn will honk once).  The system will hold memory of
the Easy Valet

TM

 Mode condition while the ignition is "on" or "off", or even  if  power is removed

from the system.

While in the Easy Valet Mode

TM

, the transmitters can still operate the Panic Feature, the

power doorlock operation, or optional trunk release.  Additionally, the doors will lock when
the ignition is turned "on" and unlock when turned "off"', if this programmable feature is

utilized.  To exit the Easy Valet

TM

 Mode, simply momentarily press the Valet Switch. The

security system will instantly revert to the disarmed condition. To confirm that Valet Mode
has been exited, the LED Status Light will be extinguished. Remember, Easy Valet

TM

 Mode only

operates when the security system is in a disarmed state - an armed condition requires using
the Personal Coded Override, which may be custom programmed to be operable only by
yourself.

Personal Coded Override - How To Disarm The System Without Using The Transmitter:

In the event the transmitter is lost, damaged, or otherwise inoperable, the Valet Switch and your
ignition key may be used to disarm the system.  This is Personal Coded Override, and you may
custom program its operation for convenience, or, a higher level of security.  As set at the
factory, Personal Coded Override operates in the following fashion:

1)

If the security system is armed, and the transmitter not available or operable, have
the ignition key ready and enter the vehicle - be prepared for the system to trigger
when the door is opened.

2)

Turn the ignition switch "on", and within 5 seconds press and release the Valet
Switch once.
The system will instantly disarm.

Personal Coded Override can offer a higher level of security if desired because, in addition

to the ignition key, you may configure a second "stage" to the procedure, and even program
a preset number of Valet Switch presses for each stage.  Please see Page 28 for further
programming and operational details of this Feature.

Page - 19

Page - 20

Remote Panic Feature

Should you feel threatened or the need to attract attention at any time, you can activate

your Excalibur Gold's Remote Panic feature by depressing the large transmitter button for 3
seconds.  Your system will respond by sounding  the siren (or horn), locking the doors and
flashing the exterior and interior lights for 60 seconds.  Remote Panic may operated regardless
of the system armed or disarmed status, while the ignition switch is "on", and while the system
is in Valet Mode.  To disengage Remote Panic, simply press and release the large transmitter
button.  If should wish to enter your vehicle after engaging Remote Panic, press and release
the large transmitter to disengage Remote Panic; the doors will also unlock, allowing easier
entry.

Optional Trunk Release: If your vehicle is equipped with electric trunk release, your

authorized Excalibur Gold dealer can configure your system to accomplish trunk release from
your transmitter. To operate this option when equipped, simply press and hold the small center
transmitter button for 2 seconds. Your vehicle will respond by releasing the trunk lid, chirping
the siren twice (or honking the horn twice), disarming the system and turning on your exterior
and interior lights for 30 seconds.   The trunk release output will not operate with the ignition
switch "on" unless the vehicle's door is open. If desired, your Excalibur Gold dealer can
program the security system to remain armed when this feature is used.

Trunk Release And 3rd Channel Output

Содержание Excalibur Gold eg-1400atv












Отзывы: