12
Status Lights
This system includes 2 status lights that are built into the window mount antenna module� It is
desirable for these to be visible from as many angles around the vehicle as possible for maximum
visual theft deterrence� The control module has a separate port for the status light, so an optional
dash/custom mounted light can be utilized if desired�
Valet / Programming Switch
This system includes a valet switch that is built into the window mount antenna module� The
control module has a separate port for the valet switch, so an optional custom mounted switch can
be used if desired�
Tach Programming
When utilizing the tach wire circuit for engine detection, the vehicle’s tach signal must be pro-
grammed to the remote start for proper operation� After making the tach wire connection, perform
the following steps:
Step 1:
Turn the ignition key “ON”
Step 2:
Within 5 seconds, press the brake pedal 5 times� (the siren will chirp 5 times)
Step 3:
Start the engine� The status lights will turn on to indicate it has learned the current tach
signal� If it does not light, check your tach connection and start this procedure again�
Step 4:
If the engine has a high idle at startup, it may be necessary to allow the idle to “settle”
to around 700 RPM� If needed, you can press the valet switch 1 time to resample the
tach signal. The status light will flash off then back on once the signal has been
resampled�
Step 5:
Turn the ignition key “OFF”�
This system is equipped with an outboard receiver or transceiver (2-way) module� It is designed
to be window mounted high on the windshield for optimal performance and range� It is best to
mount this module using the double sided stick pad included (be sure to clean glass before
adhering)� Mount it high in the windshield trying to avoid metal parts of the vehicle as they can
create “blind spots” for the antenna� Also, metal based window tint can have an adverse affect on
performance� Since the system’s status lights and valet are contained in this module, high visibility
is also desired for theft deterrence� Route the harness to the antenna module being sure to avoid
sharp metal objects that could compromise the harness jacket�
Window Mount Antenna Module
