Excalibur AL-1950-EDPB, Руководство по эксплуатации

Страница: 25 / 28

25
Installer Programmable Features (cont’d)
Feature #8 - PInK/WHITE (IGn #2)Wire Function
Ignition (press “ lock ” button to program) - DEFAuLT
Accessory (press “ unlock ” button to program)
Starter (press “ trunk ” button to program)
This feature changes the operation of the unit’s large PINK/WhITE output wire� This feature
should only be programmed by the installer
�
Feature #7 - Starter Cranking Time
0.75 Second (press “ lock ” button to program) - DEFAuLT
1.00 Second (press “ unlock ” button to program)
1.5 Seconds (press “ trunk ” button to program)
2.25 Seconds (press “ start ” button to program)
This feature determines the crank time of the 1st start attempt when in “Tachless” mode� If the
engine doesn’t start on the first attempt, it will retry up to 3 more times extending the crank time by
an additional 0�2 second with each attempt��
Feature #9 - Arm, Disarm or Additional Channels
Arm / Disarm (press “ lock ” button to program) - DEFAuLT
Arm / Channel 5 (press “ unlock ” button to program)
Channel 4 / Disarm (press “ trunk ” button to program)
Channel 4 / Channel 5 (press “ start ” button to program)
The system has outputs designed for arming and/or disarming a factory-equipped security system�
These wires may be used instead to provide further system outputs, which are remotely operated
by the controller or transmitter� These outputs are in addition to the 2nd channel and 3rd channel
outputs� As shown in the programming assignment, the arm, disarm, channel 4 and channel 5 are
programmable as various combinations� For example, if the disarm output is needed, but not the
arm output, then channel 4 may be made available for use�
Feature #11 Remote Start Lock Control
Off (press “ lock ” button to program) - DEFAuLT
Lock After Start (press “ unlock ” button to program)
unlock before start (press “ trunk ” button to program)
unlock Lock After Start (press “ start ” button to program)
This feature allows for OEM alarm/lock control in relation to remote start operations thus eliminat-
ing extra wiring�
Feature #10 Gasoline Or Diesel Engine
Gasoline (press “ lock ” button to program) - DEFAuLT
Diesel 15 Sec. Delay (press “ unlock ” button to program)
Diesel 20 Sec. Delay (press “ trunk ” button to program)
Diesel 30 Sec. Delay
(press “
start
” button to program)
This feature changes the system’s timing of the ignition and starter output sequence for gas or
diesel engines� gasoline: the starter output will occur 3 seconds after the ignitions turn on� When
in “Tachless” mode, the engine running status is determined 10 seconds after starting� Diesel:
the starter output will occur 15, 20, or 30 seconds after the ignitions turn on (allows for glow plug
warming)� When in “Tachless” mode, the engine running status will be determined 40 seconds
after cranking�