Excalibur Water Systems 2.0" High Capacity Premium Flow Series, Инструкция по установке и эксплуатации, Страница: 27 / 38

1 26
Timer 4:
Select water softener output 1. On water softener
trigger set point per water softener previously selected.
This water softener screen will not display if the water
softener does not have a water softener system board,
or if the water softener STBY was selected as the
trigger.
Time: The water softener time after the start of water
softener regen before switch is closed.
Cycle: Select a water softener cycle which will close
water softener output 1.
Volume: The water softener volume of water interval
during service between water softener switch closures.
The water softener timer 4 and 6 screens will not
display if the water softener display if STBY, REGEN, or
ERR are selected in water softener timer 2 and 3.
Timer 5:
Select water softener output 1 on duration before
turning off. This water softener screen will not display
if the water softener does not have a water softener
system board.
Water Softener Timer Screens Continued: