Excalibur Water Systems 2.0" High Capacity Premium Flow Series, Инструкция по установке и эксплуатации, Страница: 25 / 38

1 24
Timer 2:
Set water softener output 1, these water softener
settings will only be allowed with water softener
system board installed.
Time: Water softener relay is turned on after the water
softener specified time from the start of the water
softener regeneration and is left on for a specified
time.
Cycle: Water softener relay is turned on after the water
softener starts on a specified cycle and is left on for a
specified time.
Volume: The water softener relay is turned on, during
the water softener service flow only. Every specified
number of water softener volume units and is left on
for a specified time.
Volume and Regeneration: The water softener relay is
turned on every specified number of water softener
units and is left on for a specified time.
STBY: The water softener relay would be used to
control external valving, closing for water softener
regeneration, and is left on for a specified time.
REGEN: The water softener relay closes when the water
softener is in regeneration.
ERR: The water softener relay closes when the water
softner is in any error mode.
Water Softener Timer Screens Continued: