Water softener installer display settings
The water softener has one of three settings on what was selected in
configuration settings step 3cs. Volume (gallons) selected in
configuration settings step 3cs.
Step 1I – To enter water softener display press the water
softener next and up buttons on the water softener
simultaneously for 5 seconds and release.
Step 2I – The water softener volumetric capacity in
gallons to regenerate the water softener. Press the water
softener next button to go to step 3I. Press the water
softener regeneration button to exit installer display.
Step 3I – Adjust the water softener day override from 1 –
28 or off. Press the water softener next button to step 4I.
Press the water softener regeneration button to return to
previous step.
Step 4I – Use the water softener up or down buttons to
set the regeneration hour. Press the water softener next
button to go to Step 5I. Press the water softener
regeneration button to return the previous step.
Step 5I – Use the water softener up or down buttons to set
The regeneration minutes. Press the next to exit installer
Display. Press the regen button to return to previous step.
