Water Softener User Displays
When the water softener is operating, one of the five
water softener displays may be shown. Pressing the
water softener next button will alternate between the
displays shown below.
Water Softener User 1
Typical water softener user display. If water softener
volume is selected in configuration settings step 3cs.
Shows water softener volume remaining to regeneration.
If water softener volume is not selected in configuration
settings step 3cs, this water softener screen will not be
shown. If a meter is not used on the water softener this
display will not change.
Water Softener User 2
Water softener displays number of days to next water
softener regeneration.
Water Softener User 3
The water softener displays flow rate in gallons per
minute. If a water softener meter is not used this water
softener display will be show but 0 will be displayed on
the water softener screen. This water softener screen will
not be shown if 7 day or 28 days is selected in the water
softener display configuration settings step 3cs.
Water Softener User 4
The water softener displays total flow in gallons since last
reset. If a water softener meter is not used this water
softener display will be shown but 0 will be displayed.
This water softener screen will not be shown if 7 days or
28 days is selected in configuration settings step 3cs.
Press the water softener down arrow for 3 seconds to
reset water softener to 0.
Water Softener User 5
Water softener shows current time.
