4
Using the SP336 Evaluation Board
MODE CONFIGURATION
The SP336 uses a 3 bit decoder to define the protocol selected. The mode selection truth table
is shown in the data sheet and in Table 3. The
SP336E
supports eight distinct operating modes.
Modes are set using the three Mode-Configuration input pins M0, M1, and M2, which correspond
to SW3 (to the right is zero and to the left is one). The driver and receiver electrical
characteristics and the pin functions change depending on the mode selected.
Figure 1
-
Mode Configuration
Содержание SP336E
Страница 5: ...5...
