Exalt ExtendAir r4900 Скачать руководство пользователя страница 110 | Manualshive

Страница: 110 / 138

background image

Exalt Installation and Management Guide

ExtendAir (TDD) Series Digital Microwave Radios

100

203591-004

2010-09-20

Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC
regulations.

Changes or modifications not expressly approved in writing by Exalt may void the user’s authority to
operate this equipment.

This device must be professionally installed.

To comply with regulations, the output power of this device may need to be adjusted in accordance to
the associated transmission system. See

RF Output Power Setting

for details.

The antenna associated with this device shall be mounted in a location that is at least 10.5'/3.2m away
from humans that may be subject to long-term or continuous exposure.

Canada Compliance

The ExtendAir (TDD) Series 50xx models operate under RSS-210 of Industry Canada regulations.
Operation is subject to the following conditions, unless express permission is granted by Industry
Canada to operate in a different manner:

•

External amplifiers cannot be used to boost the power or to overcome transmission system losses,
unless the specific amplifier/cable/antenna combination is expressly authorized by Industry
Canada.

•

Cross-border transmissions are expressly prohibited, except with written permission from both
Industry Canada and the governing body of the neighboring country (FCC for USA)

•

Only parabolic dish antennas or directional flat-panel antennas may be used. No other types of
antennas (omni-directional, yagi, and so on) are authorized. Parabolic dishes of either grid or solid
type are allowed. Maximum gain of each type of antenna allowed is:

–

Parabolic dish: 37.9 dBi (6'/1.8m diameter)

–

Directional flat panel: 28 dBi (~2'/61cm square)

Industry Canada (IC), Canada

This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing
Equipment Regulations.

Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du
Canada.

This device complies with RSS-210 of Industry Canada. Operation is subject to the following two
conditions:

1

this device may not cause interference, and

2

this device must accept any interference, including interference that may cause undesired
operation of the device.

Antennas Supported in Canada

The ExtendAir (TDD) Series 50xx models are designed to operate with the antennas listed in

which have a maximum gain of 37.5dBi. Antennas not included in the list or having a gain greater than
37.5dBi are strictly prohibited for use with this device. The required antenna impedance is 50 Ohms.

«
...
108
109
110
111
112
...
»

Содержание ExtendAir r4900











































































































































Отзывы:

Нет отзывов

Похожие инструкции для ExtendAir r4900

Бренд: Uniden Страницы: 72

Бренд: Timex Страницы: 10

Бренд: Radio Shack Страницы: 48

Бренд: Ecom Instruments Страницы: 35

Бренд: Memorex Страницы: 10

Бренд: Eurochron Страницы: 8

Бренд: Uniden Страницы: 104

Бренд: Uniden Страницы: 4

Бренд: Hammarlund Страницы: 31

Бренд: Adler Europe Страницы: 4

Бренд: Adler Europe Страницы: 80

Бренд: Holtek Страницы: 44

Бренд: Improvements Страницы: 12

Бренд: Infinition Страницы: 16

Бренд: JVCKENWOOD Страницы: 112

Бренд: Exibel Страницы: 12

cNODE MiniS 1.11-50V Ti

Бренд: Kongsberg Страницы: 48

Бренд: Motorola Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды