Exalt Communications, Inc.
EX-5i Installation & Management
5000005
48
2006-05-17
If copying the same configuration file into multiple radios, some care needs to be taken, because
some parameters will match that may be undesirable. However, it can be easier to change just a
subset of parameters rather than every parameter, therefore copying configuration still serves a
very useful purpose. The following list of parameters may cause problems or confusion if they
match at each of a link.
•
Radio Name
•
Endpoint Identifier
•
IP address
However, it is helpful to have the following parameters match:
•
Link Name
•
Link Security Key (although each link should be different)
•
Admin and User passwords
•
Bandwidth
•
RF Frequency
•
Link Distance
•
TDD Frame Size
•
T1/E1 configurations
•
Ethernet configurations
5.12 File Activation Page
The File Activation Page is used to move stored files or uploaded files into use on the radio. The
page indicates which file is currently in use, and which file is available for use. Pressing the
SWAP button places the file shown in the Alternative File column into active state and moves
the Current File into the alternative file location.
In all cases, the radio will require a reboot after a new file is selected using
the SWAP function. This will place the radio out of service for a short period.
