NX1200 User Guide
© 2014 ExaDigm, Inc.
Page 11 of 16
Rev. 1/0614
To access the User Manager menu follow the instructions below:
1. From
Payment
App
menu
2. Go to
Admin
3. Go to
User Manager
4. Enter
User Name
and
Password
to access
Note:
Only Admin (Manager) level has access to User Management.
15.1
Managing User
Security manager provides the user interface to manage users. To access the user management area,
the highest level (manager) credential is required to perform the following operations:
Add User
Edit User
i. Unlock User
ii. Change Name
iii. Change Pwd
iv. Change Role
v. Enable/Disable
Delete user
Print users
Managers can add a new user, delete or edit current user or print users list in user management menu.
15.1.1 Roles:
Users are assigned to a specific role when they are created. Currently 3 predefined levels of roles are
available:
Clerk
Supervisor
Admin (Manager)
Users’ role can be changed from user management area in the edit user section.
15.1.2 Manager Setup:
Upon start-up of a newly installed application the terminal will require the initial login User ID, User Name
and User Password to be changed. The default manager login is [id:manager1 pass:q123456 or
q111111].
A unique user ID must be used. No duplicate ID will be allowed. The user ID can be
alpha/numeric up to 20 characters.
The password must contain a seven digit alpha-numeric password to ensure the strength against
non-authorized usage. The password cannot be the same as the last four used.
