eXact PipeCut Infinity, Руководство по эксплуатации

Страница: 7 / 20

Safety English
6
Definitions: Safety instructions
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols
DANGER : Indicates an imminently hazardous
situation which, if not avoided, will result in serious
injury or in extreme cases a fatality
WARNING : Indicates a potentially hazardous
situation which, if not avoided, could result in serious
injury or in extreme cases a fatality
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result
in property damage.
Denotes risk of electric shock.
Symbols found on the machine.
Use ear protection.
Use gloves.
Read instructions before use
.
Laser radiation: Do not look directly into
beam.
Saw blade: Saw blade behind this cover, do not
insert fingers or other body parts inside this cover.
Operating, safety and service
instructions
Read these operating, safety and service
instructions carefully before operating the pipe saw.
Store these instructions in a place where all pipe
saw operators have access. In addition to these
instructions official work, health and safety rules
must be followed. Exact PipeCut is for professional
use only.
Please notice the article number on the type plate of
your machine. The trade names of the individual
machines may vary.
Only for power tools without reduced starting current:
Starting cycles generate brief voltage drops.
Interference with other equipment/machines may occur
in case of unfavorable mains system conditions.
Malfunctions are not to be expected for system
impedances below 0.36 ohm.
Use ear protection!
WARNING:
If Pipecut Exact PipeCut Infinity tool is used with
generator or extension cords, their minimum
requirements are as follows:
Generator: minimum power of
4,9kVA for 230V, 3kVA for
100 V-120V
, if other electrical equipment is not used at
the same time.
Extension cords 230 V: The maximum length - 25
meters. Cable cross section - not less than 2,5mm ².
Extension cords 120 V: The maximum length – 82 Feet
Extra Heavy Duty