eXact PipeCut 220 INOX Series, Руководство по эксплуатации

Страница: 15 / 20

Operation English
14
Cutting result adjustment on Exact PipeCut 220 INOX Series
If the cutting result is not square, blade alignment can
be adjusted.
CAUTION! Blade alignment adjustment is very
effective and can lead to blade and/or saw damage if
adjusted too much.
Before making the adjustment, note the bodyplate
alignment (FIGURE N / 1), in case it is needed to return
back to the original setting.
Loosen the two screws securing the bodyplate
FIGURE N / 2. Turn the bodyplate to the required
direction and secure the two screws. Make only small
adjustments at a time.
If the cutting line goes from right to left (FIGURE K/a),
turn the bodyplate clockwise (FIGURE O / 1).
If the cutting line goes from left to right (FIGURE K/b),
turn the bodyplate counterclockwise (FIGURE O / 2).
CAUTION! The adjustment indicator located in the
back of the adjustment plate does not give the exact
measurement to adjust. The indicator shows only the
direction of adjustment and the category of magnitude.
FIGURE N
FIGURE O