Manual Pauline TH-PROJ-UNI
Version 1.2
02.01.2020
Page 3 of 16
1.1 Tools required
The tools required are:
3 mm hex key to adjust the 5 arms of the PAULINE, a 4mm hex key to turn
the adjustment screws (Figure 1)
SW19 Wrench (Figure 2) to tighten and loosen the C-clamp on top
Figure 1: 3mm, 4mm hex key (Allen key)
Figure 2: SW19 wrench
These installation instructions must always be handed over to the installing
person.1
Read these instructions carefully before installing the system.
1 Only a qualified person should install this product
