Manual Pauline TH-PROJ-UNI
Version 1.2
02.01.2020
Page 12 of 16
Yaw
Before installation:
By unlocking the quick release (shown in
the picture to the left) the C-clamp can
be turned around the Z-Axis by 360
degrees.
Attention: Do not use this adjustment
option, while the ceiling mount is
already hanging on a truss. If the quick
snap button, which is on the opposite
side of the quick snap screw, is pressed
accidentally while the quick snap screw
is unlocked, the lower part including the
projector will fall off.
After installation:
For the fine adjustment you have to
unlock the quick release on top of the
metal plate.
By turning the white adjustment screw
on top of the metal plate, you can turn
the projector around the Z-Axis with an
angle of ± 25 degrees.
