Manual FRAME-PF-UNI-PORAD
Version 1.2
03.04.2020
Page 6 of 19
When installing the Portrait Adapter with the EVO-LINK-200 series make
sure to not exceed the maximum weight load limits of EVO-LINK-200
series of 200 kg (440.924 lbs).
Do not install the Portrait Adapter while people are present under the
installation zone.
When installing the projector, make sure no one is in the area underneath
the installation zone. Otherwise serious accidents may occur if the
projector is dropped during installation.
Always secure the frame to the rigging truss with safety cable.
The frame should always be secured with an appropriate safety cable so
that in case of a malfunction it doesn’t fall more than 5cm. Please consult
the local laws or regulations regarding the additional safety of hanging
equipment.
Never change the DIN 980 M10 nuts with other types of nuts
The DIN 980 Nuts are approved to be loosen and tighten several times.
Other nuts e.g. DIN 934 or DIN 985 with nylon-insert can only be used
once
Do not change the DIN 980 nuts otherwise serious accidents may occur.
CAUTION
Before installing the projector frames with the Portrait Adapter, please
read the projector’s user manual and the frame installation guide.
The Portrait Adapter with the projector and the projector frame must be
installed only in an environment that is recommended by the projector
manufacturer.
Minimum 2 persons are required to install the Portrait Adapter.
