Manual FRAME-EVO-P10 / P10-US
Page
5
of
39
08.09.2021
2. Safety instructions
These installation instructions must always be handed over to the installing person.
1
Read these instructions carefully before installing the system.
INTENDED USE
The FRAME-EVO-P10 / P10-US frame is intended for use by fully qualified, trained and
competent persons to provide safe and secure transportation, installation and adjustment
of projectors.
Only use the frame with projector in a closed environment (conference rooms, theatres,
convention halls, etc.) where there is no wind, moisture, excessive heat etc.
Make sure that only the corresponding projectors are installed in this frame! Do not try to
use it with other projectors because serious accidents can occur!
WARNINGS
Installation work should only be carried out by a qualified technician.
•
If this product is not installed correctly, serious accidents may result.
Do not use the FRAME-EVO-P10 / P10-US frame outdoors.
•
This product is made only for indoor usage. If the FRAME-EVO-P10 / P10-US frame is
mounted outdoor, there are many influences like wind or rain that can have an effect
on the stability of the whole system. This can cause serious accidents and property
damage.
Do not place the frame on top of unstable surfaces.
•
If the frame is placed on top of a surface which is sloped or unstable, it may fall down
or tip over and injury or damage could result. Make sure that the surface can support
a load of 175 kg (385.81 lbs)
2
plus the weight of all additional equipment as well as
other potential systems.
1
Only a qualified person should install this product
2
175 kg (385.81 lbs) = 3 x (weight of heaviest pro weight of heaviest lens + weight of FRAME-EVO-P10 / P10-US)
