EWT NOCeco 15M, Руководство пользователя

Страница: 10 / 32

EN-5 2105/A www.ewt.eu
NL PL SV FR EN DE
5. Fitting castors

Before using the appliance, the castors must be fit
-
ted!

Carefully place the appliance on the floor with the
underside facing upwards. The surface must not be
too hard – paint or appliance damage!

Installing the castors between the outer-most rib on
each end of the radiator and its adjacent rib using
the wing bolts provided.

Tighten the wing bolts and carefully turn the radia
-
tor back on the castors.
6. Operation
To use, insert the plug in to the socket.
Indicator lamp
The indicator lamp lights up when the heating device is
ready for use.
Selecting the output
The output switch (A) enables you to select three differ
-
ent heat outputs. When set to 0, the device is
switched off.
Thermostat
To achieve a specific room temperature, set the con
-
troller knob (B) to the highest value. Operate the appli
-
ance at full power until the required room temperature
is reached. Set back the thermostatic controller until
the appliance switches off with an audible “click”. This
temperature will be kept almost constant by the ther
-
mostatic control switching on and off automati
-
cally.Please note that the appliance can only be
switched on when the thermostat setting is higher than
the room temperature.
7. Winding the cable
When unplugged, the power cable can be wound
around the cable holder (C).
Type
Output
Level I Output
Level II Output
Level III
NOCeco 10M 500 W 1000 W 1500 W
NOCeco 15M 600 W 1400 W 2000 W
NOCeco 20M 800 W 1700 W 2500 W
A
B
C