CLEANING AND MAINTENANCE
WARRANTY
WARNING: ALWAYS UNPLUG THE UNIT BEFORE MOVING OR
SERVICING. DO NOT IMMERSE THE POWER CORD, PLUG AND THE
WHOLE UNIT INTO WATER OR RINSE UNDER THE TAP!
Caution: Do not use detergent, gasoline, benzene, thinner, or other solvents
to clean the unit to avoid damage of the appliance.
This EWT® fan carries a limited two (2) year warranty against defects in
workmanship and materials from date of purchase under normal household use.
Warranty does not apply to defects due to direct or indirect abuse, negligence,
misuse, accidents, repairs or alterations and lack of maintenance. Please keep
your receipt as proof of purchase. This warranty gives you specific legal rights,
and you may have other rights, which vary from state to state.
14
15
1. Place the fan on a stable flat surface.
2.
Speed
: Turn the speed & oscillation switch to the right.
« 0 »: OFF
« 1 »: Low fan speed
« 2 »: Medium fan speed
« 3 »: High fan speed
3.
Oscillating 70°
: Turn the speed & oscillation switch to left, then the
unit will oscillate with each desired speed, if you want to stop the oscillating,
just turn the switch to right side.
« 0 »: OFF
« 1 »: Low fan speed + Oscillation
« 2 »: Medium fan speed + Oscillation
« 3 »: High fan speed + Oscillation
Figure 2
HOW TO USE:
Unplug the unit and wait until the fan stop running before cleaning.
DO NOT use damp cloth to clean the inside parts of the fan.
It is recommended to clean the fan every month.
It is not recommended to take the fan apart, except the authorized agent
or any agent qualified to undertake electrical repairs.
If the fan will not be used for a long time, store it in the cool, dry, safety
place and far away from children. Do not store the appliance in hot place
and under sunshine.
Unplug before move or maintenance. This can only be done by an
authorized service agent such as your local Sealer dealer or any agent
qualified to undertake electrical repairs.
If the unit requires external cleaning make sure it is switched off and
unplugged from the mains supply. Use a soft tissue or cloth for general
cleaning. To remove more persistent dirt or grime wipe down with a cloth
that has been dampened with warm soapy water. Do not use any solvents
(such as thinners) as these may damage the plastic casing.