EWT EWT G20, Руководство пользователя

Страница: 17 / 32

WATER BYPASS
In case of an emergency such as softener maintenance, you can isolate your water softener from
the water supply using the bypass valve located at the back of the control. In normal operation
the bypass is open with the ON/OFF knobs in line with the INLET and OUTLET pipes. To isolate the
softener, simply rotate the knobs to the BYPASS position.
You can use your water related fixtures and appliances as the water supply is bypassing the
softener. However, the water you use will be hard. To resume treated service, open the bypass valve
by rotating the knobs to SERVICE position.
Please make sure bypass knobs are completely open otherwise the unSoftenered water could
bypass through the valve.
SERVICE BYPASS
BYPASS NOT ALLOWED POSITION
Please make sure bypass knobs are completely
open otherwise the unsoftenered water could
bypass through the valve.