EC3020
Changing and calling up the basic parameters
14
1. Language
The language can be set in the step.
2. Number of filters
Enter the number of filters installed in the system.
3. Conductivity meter
A measurement cell with a specific cell constant must be selected depending on the
required conductivity of the water. Here, a cell constant of 0.01 to 10.00 cm
-1
can be
programmed for the conductivity meter.
An electronic interruption of the
measurement cell, electronic defects in the system or air in the measurement cell
Step no.: 1.1
D Nl E F
Step no.: 3.1
Constant 0.10
Step no.: 3.2
Value Min 1.0
Step no.: 2.1
No. of filters 2
