EC3020
Changing and calling up the basic parameters
13
Changing and calling up the basic parameters
On taking the controller into operation, the operating values of the reverse osmosis
system are set by entering the basic parameters.
These values can be changed at any time, but will not be lost in the event of a
power failure.
To prevent accidental program changes, the key must be pressed for
four seconds before gaining access to the programming mode.
Simply press the same key to navigate the programming mode.
The programming mode is automatically exited approx. 2 minutes after
the last key operation or by entering the indicated key combination.
Press the top key to move the cursor.
Use the bottom key to change numerical values, which you have
selected with the cursor, within the available range.
Also use this key to switch between ‘-‘ and ‘|’ in case of option questions.
