Chapter 3
Hardware Description
Hooks to be pressed are off-centered – press while pulling upwards
Insert the Extension Card carefully and slide it down until the hooks are
clicking
. Make sure
the card is completely inserted.
3.6.3. Multiple Ethernet Extension Cards
The eWON Flexy firmware supports up to
one
Ethernet Extension Card of type FLX 3101.
The boot process of the Base Unit includes an automated detection of the inserted
Extension Cards. This detection is done sequentially, slot per slot starting from the left to
right.. Only the first detected Ethernet card (the most left one) will be taken into account by
the Flexy firmware.
Additional cards of the same type will be ignored. Contrary to slot-specific cards inserted in
a wrong slot, Ethernet cards in excess do not alter proper operation of the Base Unit and
other Extension Cards.
Page 11 / 15
eWON Flexy Single Ethernet Ext. Card FLX3101 | IG 017
