Installation instructions GOURMET PREMIUM Single
Despite simple Assembly they should only installed by technically savvy Persons.
1. Close the water supply at the corner valves under your sink
2. Open Cold and hot water lines on your faucet (pressure release)
3. Demount the current flex-tube from the cold water angle valve on the wall (KW)
4. Screw the EWO vitalizing module (
No.2
) on the outcome of the Filter housing
(
No.1
) - take care for the seal!
5. Mount the short flex-tube (
No.7
) to the angle valve under your sink (cold water)
and on the other side the T-piece adapter (
No.8
)
6. Search for a point on the kitchen surface to install the additional faucet and drill
there
a
12mm
hole
7. Connect the cold water input of your faucet with the T-piece adapter (
No.8
) and
the remaining, third outlet of the T-piece with the pipe (
No.5
) on the filter housing
8. Mount the tube (
No.6
) at the output of the EWO VITAL device and connect it
with the double nipple (
No.9
) to the input of the new Single faucet
9. Attach the filter housing bracket (
No.3
) with the woodscrews at a suitable
place under your sink and screw the filter housing on it
10. Open the corner valves under the sink
and check the installation for leakprofeness
11. Open breather-screw (
No.11
) on top of
filter housing shortly to eliminate
a possibly existing Air cushion
12. Flush the cartridge a few minutes
to
activate
it
14
