Machine description – quick overview
Machine control – Operating elements
24
099-005224-EW501
08.11.2011
4.3.3
M2.40 welding machine control
Figure 4-6
Item Symbol Description
0
1
Button, Welding task / operating point
The parameters are set on the rotary transducer
Wire speed display (m/min)
Welding current display (A)
Sheet metal thickness display (mm)
Display and select the jobs (welding tasks, selection via job list).Change the
JOBs by holding down the button (approx. 3 sec), LED flashes.
2
Key button, Operating mode
Non-latched
Latched
MIG spots (parameter selection t1 is carried out using the "Runtime
parameters" button, setting on the "Rotary transducer".
Interval (parameter selection, t1 = pulse time, t2 = pulse pause, carried out
using "Runtime parameter" button, setting on the "Rotary transducer".
Signal light, Choke tappings
Depending on the machine design, there are two or three workpiece connection
sockets on the welding machine (choke tappings). The machine displays the
recommended workpiece connection in JOB mode (see relevant images on the
connection sockets).
Choke tapping 1 (hard), workpiece lead connection socket
Choke tapping 2 (medium), workpiece lead connection socket
3
Choke tapping 3 (soft), workpiece lead connection socket
Содержание Wega 401 M1.02 FKG
Страница 5: ...Contents Notes on the use of these operating instructions 099 005224 EW501 08 11 2011 5...
Страница 18: ...Machine description quick overview Rear view 18 099 005224 EW501 08 11 2011 4 2 Rear view Figure 4 2...
Страница 66: ...Appendix B Overview of EWM branches 66 099 005224 EW501 08 11 2011 12 Appendix B 12 1 Overview of EWM branches...
