EWM Trolly 55.2-2, Руководство по эксплуатации

Страница: 8 / 29

Intended use
Transport and installation
8
099-008630-EW501
20.03.2012
3 Intended use
WARNING
Hazards due to improper usage!
Hazards may arise for persons, animals and material objects if the equipment is not
used correctly. No liability is accepted for any damages arising from improper usage!
• The equipment must only be used in line with proper usage and by trained or expert staff!
• Do not modify or convert the equipment improperly!
CAUTION
Risk of accidents due to improperly prepared transport vehicle!
Depending on the machine series the transport vehicle has to be adapted to mount the
machine. Failing to adapt the transport vehicle can cause the machine being transported
to topple and lead to injuries!
NOTE
Additional options for holding a wire feeder have to be retrofitted to the trolley for
MIG/MAG machines.
• Refer to the system overview chapter!
The Trolly 55.2-2 transport system is suitable for:
• moving the machines and machine combinations listed,
• moving properly fixed machines and add-on parts that are suitably secured.
Any other use of the transport systems is regarded as "improper" and no liability is assumed for any
damage arising therefrom.
Power source
• Phoenix 405, 505
• Taurus 405, 505
Wire feed unit
• drive 4
• drive 4L
• drive 200C
• drive 300C
Cooling unit
• cool50 U40
• cool50-2 U40